当前位置： 首页 > news >正文

kubeadm安装k8s

news 2025/7/8 13:27:02

1、环境准备

1.1、升级系统内核

参考另一篇文章：https://blog.csdn.net/u012533920/article/details/148457715?spm=1011.2415.3001.5331

1.2、设置Hostname

cat <<EOF > /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.10.20 k8s-20
192.168.10.21 k8s-21
192.168.10.22 k8s-22
192.168.10.23 k8s-23
EOF#以下命令行分别在每台虚拟机执行：
hostnamectl set-hostname <每台虚拟机的hostname>

1.3、关闭防火墙

systemctl stop firewalld.service
systemctl disable firewalld.service

1.4、添加 aliyun 源

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

1.5、重置yum源

yum clean all
yum makecache

1.6、同步时间

timedatectl set-timezone Asia/Shanghai
yum install ntpdate -y
ntpdate ntp1.aliyun.com
#可设置定时任务定时同步时间

1.7、关闭交换分区

sed -ri 's/.*swap.*/#&/' /etc/fstab  
swapoff -a

1.8、关闭selinux

setenforce 0
sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config

1.9、永久添加模块

cat <<EOF > /etc/modules-load.d/k8s.conf
overlay
br_netfilter
modprobe br_netfilter
modprobe overlay
EOFlsmod | grep br_netfilter

1.10、修改内核参数

cat > /etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF#这个命令的作用是应用 k8s.conf 文件中的内核参数设置，并且开启网络桥接的防火墙功能。其中 k8s.conf 文件中的内容包括以下三个参数设置：
#net.bridge.bridge-nf-call-iptables = 1 表示开启防火墙功能。
#net.bridge.bridge-nf-call-ip6tables = 1 表示开启 IPV6 的防火墙功能。
#net.ipv4.ip_forward = 1 表示开启 IP 转发功能。sysctl -p /etc/sysctl.d/k8s.conf
#重新加载内核参数配置文件，以确保这些设置生效。
sysctl --system

1.11、安装ipvs模块

yum -y install ipset ipvsadmcat <<EOF > /etc/sysconfig/modules/ipvs.modules
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh：
modprobe -- nf_conntrack
EOFchmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack

1.12、安装基础包

yum install -y yum-utils device-mapper-persistent-data lvm2 wget net-tools nfs-utils lrzsz gcc gcc-c++ make cmake libxml2-devel openssl-devel curl curl-devel unzip sudo ntp libaio-devel wget vim ncurses-devel autoconf automake zlibdevel python-devel epel-release openssh-server socat ipvsadm conntrack ntpdate telnet ipvsadm

2、cri-docker配置

cat << EOF >/usr/lib/systemd/system/cri-docker.service
[Unit]
Description=CRI Interface for Docker Application Container Engine
Documentation=https://docs.mirantis.com
After=network-online.target firewalld.service docker.service
Wants=network-online.target
Requires=cri-docker.socket[Service]
Type=notify
ExecStart=/usr/bin/cri-dockerd --network-plugin=cni --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.9
ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always
StartLimitBurst=3
StartLimitInterval=60s
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TasksMax=infinity
Delegate=yes
KillMode=process[Install]
WantedBy=multi-user.target
EOFcat << EOF > /usr/lib/systemd/system/cri-docker.socket
[Unit]
Description=CRI Docker Socket for the API
PartOf=cri-docker.service[Socket]
ListenStream=%t/cri-dockerd.sock
SocketMode=0660
SocketUser=root
SocketGroup=docker[Install]
WantedBy=sockets.target
EOF##########把以上两份脚本复制到集群中的其他主机################systemctl daemon-reload && systemctl enable cri-docker --now
systemctl is-active cri-docker

3、安装kubernetes

yum install -y kubelet-1.28.2 kubeadm-1.28.2 kubectl-1.28.2
systemctl enable --now kubeletkubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.28.2 --pod-network-cidr=10.244.0.0/16 --cri-socket unix:///var/run/cri-dockerd.sock

4、安装网络插件 - Flannel

kubectl apply -f https://github.com/flannel-io/flannel/releases/latest/download/kube-flannel.yml

测试网络的例子：

vi nginx.yamlapiVersion: apps/v1 
kind: StatefulSet #资源类型
metadata:name: web
spec:serviceName: "nginx" #看这里，思考：为什么多一个这个字段？replicas: 2selector:matchLabels:app: nginxtemplate:metadata:labels:app: nginxspec:containers:- name: nginximage: nginx:1.9.1ports:- containerPort: 80name: web---
apiVersion: v1
kind: Service #资源类型
metadata:name: nginxlabels:app: nginx
spec:ports:- port: 80name: webclusterIP: None # 为none，思考一下selector:app: nginxkubectl apply -f nginx.yaml#以上执行完后,执行以下命令:
kubectl run busybox --image busybox:1.28.4  --image-pull-policy=IfNotPresent --restart=Never --rm -it busybox -- sh
If you don't see a command prompt, try pressing enter.
/ # nslookup web-0.nginx.default.svc.cluster.local
Server:    10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.localName:      web-0.nginx.default.svc.cluster.local
Address 1: 10.244.3.2 web-0.nginx.default.svc.cluster.local

5、创建默认的存储卷类

apiVersion: v1
kind: ServiceAccount
metadata:name: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: kube-system        #根据实际环境设定namespace,下面类同
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: nfs-client-provisioner-runner
rules:- apiGroups: [""]resources: ["persistentvolumes"]verbs: ["get", "list", "watch", "create", "delete"]- apiGroups: [""]resources: ["persistentvolumeclaims"]verbs: ["get", "list", "watch", "update"]- apiGroups: ["storage.k8s.io"]resources: ["storageclasses"]verbs: ["get", "list", "watch"]- apiGroups: [""]resources: ["events"]verbs: ["create", "update", "patch"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: run-nfs-client-provisioner
subjects:- kind: ServiceAccountname: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: kube-system
roleRef:kind: ClusterRolename: nfs-client-provisioner-runnerapiGroup: rbac.authorization.k8s.io
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: leader-locking-nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: kube-system
rules:- apiGroups: [""]resources: ["endpoints"]verbs: ["get", "list", "watch", "create", "update", "patch"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:name: leader-locking-nfs-client-provisioner
subjects:- kind: ServiceAccountname: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: kube-system
roleRef:kind: Rolename: leader-locking-nfs-client-provisionerapiGroup: rbac.authorization.k8s.io
---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:name: nfs-storageclassannotations:storageclass.kubernetes.io/is-default-class: "true"
provisioner: nfs-storage-provisioner #这里的名称要和provisioner配置文件中的环境变量PROVISIONER_NAME保持一致
parameters:
#  archiveOnDelete: "false"archiveOnDelete: "true"
reclaimPolicy: Retain
---
apiVersion: apps/v1
kind: Deployment
metadata:name: nfs-client-provisionerlabels:app: nfs-client-provisioner# replace with namespace where provisioner is deployednamespace: kube-system  #与RBAC文件中的namespace保持一致
spec:replicas: 1selector:matchLabels:app: nfs-client-provisionerstrategy:type: Recreateselector:matchLabels:app: nfs-client-provisionertemplate:metadata:labels:app: nfs-client-provisionerspec:serviceAccountName: nfs-client-provisionercontainers:- name: nfs-client-provisioner#image: quay.io/external_storage/nfs-client-provisioner:latest#这里特别注意，在k8s-1.20以后版本中使用上面提供的包，并不好用，这里我折腾了好久，才解决，后来在官方的github上，别人提的问题中建议使用下面这个包才解决的，我这里是下载后，传到我自已的仓库里image: k8s.m.daocloud.io/sig-storage/nfs-subdir-external-provisioner:v4.0.2# image: easzlab/nfs-subdir-external-provisioner:v4.0.1 # image: registry-op.test.cn/nfs-subdir-external-provisioner:v4.0.1volumeMounts:- name: nfs-client-rootmountPath: /persistentvolumesenv:- name: PROVISIONER_NAMEvalue: nfs-storage-provisioner  #provisioner名称,请确保该名称与 nfs-StorageClass.yaml文件中的provisioner名称保持一致- name: NFS_SERVERvalue: 192.168.10.20  #NFS Server IP地址- name: NFS_PATHvalue: "/nfs/data"    #NFS挂载卷volumes:- name: nfs-client-rootnfs:server: 192.168.10.20  #NFS Server IP地址path: "/nfs/data"     #NFS 挂载卷
http://www.lqws.cn/news/179299.html

相关文章：

  • 黄晓明新剧《潜渊》定档 失忆三面间谍开启谍战新维度
  • 极空间z4pro配置gitea mysql,内网穿透
  • pgsql：还原数据库后出现重复序列导致“more than one owned sequence found“报错问题的解决
  • 网页端 js 读取发票里的二维码信息（图片和PDF格式）
  • 32单片机——窗口看门狗
  • 五子棋测试用例
  • go语言学习 第6章：错误处理
  • 浏览器工作原理05 [#] 渲染流程（上）：HTML、CSS和JavaScript是如何变成页面的
  • Java逻辑运算符常见错误分析与规避指南
  • 03 mysql 的环境搭建
  • 服务器磁盘空间被Docker容器日志占满处理方法
  • 服务器信任质询
  • 什么？连接服务器也能可视化显示界面？：基于X11 Forwarding + CentOS + MobaXterm实战指南
  • 服务器出现故障怎么办？快速排查与解决方法
  • PostgreSQL 的扩展pg_freespacemap
  • Linux操作系统之进程（五）：初识地址空间
  • Edge(Bing)自动领积分脚本部署——基于python和Selenium(附源码)
  • 七、数据库的完整性
  • Codeforces EDU Round 179 A~D
  • PDF转Markdown/JSON软件MinerU最新1.3.12版整合包下载
  • HarmonyOS运动语音开发：如何让运动开始时的语音播报更温暖
  • Redis 主从 + 哨兵集群部署
  • 【HarmonyOS 5】出行导航开发实践介绍以及详细案例
  • 《深度探秘：Java构建Spark MLlib与TensorFlow Serving混合推理流水线》
  • 麒麟系统使用-进行.NET开发
  • 电脑开不了机，主板显示67码解决过程
  • vue项目引入tailwindcss
  • 华为 “一底双长焦” 专利公布，引领移动影像新变革
  • 在 Windows 系统上运行 Docker 容器中的 Ubuntu 镜像并显示 GUI
  • 【信息系统项目管理师-论文真题】2025上半年（第一批）论文详解（包括解题思路和写作要点）